Welcome Log in
--Price: lowest firstPrice: highest firstProduct Name: A to ZProduct Name: Z to AIn-stock first Sort by
Arduino 2560, for driving the RAMPS board
Starting out with 3D printing, and just want to have a single-PCB solution? Get this kit. It contains all you need to build a Prusa Mendel or other 3D printer. We can assemble it all optionally, at an extra cost, so it's plug & play.
If you're looking for all the components needed for a working RAMPS board, it's here! Just add the components to the board, follow the instructions as linked below, and you have a working board. No endstops or Pololu included.
A complete RAMPS board, including needed endstops, pullup resistors and cabling for them. We have included Pololu A4983 stepper drivers by default, but they are optional. This kit comes unassembled, however assembly is optional. Please note assembly is made to order, we do not keep assembled stock. See below for complete contents.
This is a kit that holds all components you need for your RAMPS v1.3 PCB assembly. We've included normal headers instead of stackable headers, since the Pololu's are too high to fit a daughter shield on top anyways. See complete description for exact contents.
Professionally manufactured PCB version 1.3 of RAMPS with full silkscreen and through-plated holes. This is just the PCB, no components mounted!
This NEMA17 stepper motor has a massive torque of 5.5 kg.cm and that makes it perfectly suitable for 3D printing purposes. It can be used to drive all axis, and the extruder on a RepRap (or alike) bot! These are custom made motors with extra long 60cm connection wires allowing for easy assembly of your mendel.
A complete Sanguinololu 1.3a board, including endstops, pullup resistors and cabling for them. We have included Pololu A4988 stepper drivers by default, but they are optional. This kit comes unassembled, however assembly can be done completely or just the SMD part. Assembly is made to order, we do not keep assembled stock. See below for...
A set of 3 microswitches and accompanying cabling to plug them in a RAMPS board. We include pullup resistors for you, should your board / firmware require them.
USB 2.0 A-B cable 1.8m
Professionally manufactured PCB version 1.3a of Sanguinololu (SL) with dual sided silkscreen and through-plated holes. This is just the PCB, no components mounted! SL is a simplified version of RAMPS, and the Arduino was integrated into the PCB! This gives you a complete solution for the price of what normally would be just the shield! With...
Starting out with 3D printing, and just want to have everything you need for electronics? Get this kit. It contains all you need to build a Prusa Mendel or other 3D printer. By getting this kit, you indirectly support the Arduino organisation. We can assemble it all optionally, at an extra cost, so it's plug & play.
This 420W PSU should be all you need for driving your 3D printer. You can hook up a printer, heated printbed and maybe even a heated chamber? This PSU is tested at 220V, but should be switchable to 110V
Starting out with 3D printing, and just want to have everything you need for electronics and are on a budget? Get this kit. It contains all you need to build a Prusa Mendel. With RAMPS1.3 electronics, so you can solder it yourself, but we can assemble it all optionally, at an extra cost, so it's plug & play.
Arduino Clone 1280, for driving the RAMPS board. This clone uses an FT232RL for more reliable serial communications, especially usefull with high-speed printing.
This is a kit that holds all components you need for your Sanguinololu v1.3a PCB assembly. See complete description for exact contents.
items: 10162050
No products
Shipping € 0,00 Total € 0,00
Cart Check out
» All new products
Follow us